For a complete Irrigation Systems, extensions to your own system or just spare parts all under one roof.
We stock all garden pop-up sprinklers, rotor sprinklers and spray sprinklers, irrigation pipe, porous pipe often known as leaky pipe, tap timers, controllers, manifolds, solenoids, barbed fittings, drip irrigation, micro fittings, border sprays, hanging basket drippers, rain train and oscillating sprinklers.
“Sprinkler Irrigation Systems Ltd” can offer you all irrigation products on a supply only or fully installed. If you require advice on what to do with what, solutions and advice are always available.
The Dosatron D45re3 Fertiliser Injector is the ideal way to add feed to your lawn and plants.
Precise, simple and reliable are words that describe Dosatron D45RE15VFII. Installed directly in the water supply line, the Dosatron operates by using water pressure as the power source. The water activates the Dosatron, which takes up the required percentage of concentrate. Inside the Dosatron, the concentrate is mixed with the water. The water pressure forces the solution downstream. The dose of concentrate will be directly proportional to the volume of water entering the Dosatron, regardless of variations in flow or pressure which may occur in the main line.
Dosatron units are compatible with computer controller systems.
Homogeneous mixing occurs inside the unit and the force of water pushes the blended solution downstream.
Accessories include the following:
- Mounting bracket,
- manual bypass,
- suction hose with strainer and weight,
- operating manual.
- Recommended: 200 mesh filter, check valve, pressure regulator, flow restrictor
Dosage Rate 0.2% – 1.5%
Flow Rate 100ltr – 4.5m3 /Hr.
Operating Pressure 0.5Bar – 5Bar (7 -70 psi)
Pipe connection size 1¼” male BSP
Max Temperature 40 Degrees
Maximum Unit Size 620 x 260 x 245 mm
Weight 3.2 Kg
Dosatron D45re3 Markets
Environment – Hygiene – Water treatment – Vehicle wash – Metal processing
– Food processing – Graphic Arts – Horticulture…
Dosatron D45re3 Principal applications
Disinfecting – Cleaning – Fertigation – Phytosanitation – Lubrication –
PH/TH Correction – Sanitation – Flocculation – Vehicle wash…
Dosatron D45re3 Installation Regulations:
Refer to local water regulations, prior to installing your Dosatron..
To optimize your Dosatron, we advise to:
– Install a filter (300 mesh [60 microns]) upstream, depending on your
– Change the dosing seals at least once a year.
– Rinse as often as possible with clear water.
– Turn off the water supply and allow the pressure to drop to zero before
adjusting the injection rate.
– Install necessary protections for excess flow, excess pressure and water
hammer (anti-hammer flow/pressure device).
– Install your Dosatron on a total by-pass line.
Check out our Dosatron D45re3 Fertiliser Injector in our Online Shop