Mp Rotator Image
MP Rotators

The MP Rotator® is a revolutionary sprinkler setting a new standard for water efficiency in the turf & landscape industry. It is a multi-stream rotor the size of a spray nozzle. It fits any conventional spray head body or shrub adapter, transforming it into a high uniformity, low application rate sprinkler with matched precipitation even after arc and radius adjustment.

 

View More features
!

MP 1000 2.5- 4.6 mts Radius
!
Larger picture
MP1000 ADVANTAGES VS. CONVENTIONAL SPRAYS
Covering 90-210 Degrees and 360 Degrees

• Higher uniformity — even after radius reduction
• Superior wind resistance
• Reduced misting at higher pressure
• Outstanding close-in water
• Lower application rate — less runoff
• Wider operating pressure range
• Lower system cost — ability to put more heads per zone or use smaller pipe sizes
 

 

 

 

MP 2000 Rotator 4- 6.4mts Radius
!
Larger picture
The MP2000 Rotator is a 13-21' (4-6.4 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub adapter.


*To achieve maximum radius reduction with any MP Rotator model use a 30 PSI (2 BAR) regulating spray body.
MP2000 ADVANTAGES VS. CONVENTIONAL SPRAYS

    • Higher uniformity — even after radius reduction
    • Superior wind resistance
    • Reduced misting at higher pressure
    • Outstanding close-in water
    • Lower application rate — less runoff
    • Wider operating pressure range
    • Lower system cost — ability to put more heads per zone or use smaller pipe sizes

Technical performance chart view

MP 2000 Features

 

 

          MP 3000 Rotator 7.6 - 9.1 mts Radius
          !
          Larger picture
          THE MP3000 Rotator is a 22-30' (6.7-9 meter) sprinkler (including the 25% radius reduction* capability)
          that fits any conventional spray head body or shrub adapter.


          *To achieve maximum radius reduction with any MP Rotator model use a 30 PSI (2 BAR) regulating spray body.

          • Better performance in wind with tight,
          high-energy 30’ (9m) streams
          • Faster installation because nozzle trees are eliminated
          • Matched precipitation between arc settings and after radius reduction
          • Better uniformity after radius reduction — no diffuser screw to cause stream distortion
          • Lower cost — especially for shrub, 6” (15cm) and 12” (30cm) pop-up models

           Technical performance chart view

          MP 3000 Features

           

          MP Corner (Female Thread)
          !
          Larger picture

          The MP Corner is an 8-15' (2.5-4.6 meter)sprinkler designed for tight corners that are difficult to irrigate properly with conventional sprinklers. It has an adjustable arc from 45° to 105°, maintains MPR at any arc, any radius and can be placed on the same zone with any other MP Rotator model.

           

          MP Strip
          !
          Larger picture
          • MP Strip models offer improved uniformity and excellent wind-fighting ability over conventional spray heads.
          • Automatic matched precipitation even after arc & radius adjustment
          • Low application rate reduces runoff on slopes & tight soils
          SIMPLE ADJUSTMENTS

          • The MP Side Strip features an adjustable right edge to fit curved strips.
          • No need to change nozzle to maintain matched precipitation
          • Removable inlet filter for easy cleaning
          The MP Left & Right Strips irrigate an area 5’ x 15’ (1.5-4.6 m) at 30 PSI (2.1 bar) at full radius. Flow rate at rectangular spacing = .19 GPM (.72 LPM). When the radius is reduced the pattern is 4’ x 12’ (1.2-3.7 m). Flow rate at rectangular spacing = .14 GPM (.53 LPM).

          The MP Side Strip irrigates a strip 5’ x 30’ (1.5-9.1 m) at 30 PSI (2.1 bar) at full radius. Flow rate at rectangular spacing = .38 GPM (1.44 LPM). When the radius is reduced the pattern is 4’ x 24’ (1.2-7.3 m). Flow rate at rectangular spacing = .27GPM (1.02 LPM).
           
           
           

          MP Rotator Adjustment Tool
          !
          Larger picture

          4" Sprinkler Body

          !

          Male connection 

          M P Rotator fits into this body

           1/2" Base connection 

          Swing Joint
          !
          Larger picture

          For connecting from your Pop-up to your supply line, using a Male Elbow Compression or a Female Compression Tee.

          Available in

          6" x 1/2"

          6" X 3/4"

          12" x 1/2"

          12" x 3/4"