A Outdoor controller with a plastic cabinet comes a 8 Station unit expandable up to 32 Station with either 4 or 8 Station modules.
4 Fully Independant Programs
Each with seperate day cycles and 8 start times, offering totalflexibility.
If the thought of running wires from a controller has kept you from adding rain sensors to your systems, now there’s a hasslefree alternative. The Hunter Wireless Rain-Clik™ attaches quickly and easily–simply install the receiver unit next to your irrigation controller, then install the transmitter anywhere that the device can receive representative rainfall. No ladders needed to attach to a high outcropping on a building, no messy wires to hide out of view. What also sets a Hunter Rain-Clik apart are features no other rain-sensing device offers. The unique Quick Response™ feature allows the product to shut off immediately when it starts to rain. And, unlike its competition, Hunter’s sophisticated sensing mechanism cannot be fouled by debris, giving the Wireless Rain-Clik the most highly accurate operation.
View Tech Sheet
This is the cable to use from your controller to your socket.
Comes with a a plug.
This is a 8 core cable to be used from your solenoids to the controller.
This is not suitable for burial.
Use a DBM to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal. Recommended for use with low energy underground circuit wires, Sprinkler System, Landscape Lighting or other moisture resistance wires for applications of less than 30 volts.
Discounts on Larger quantities
Just click the box and highlight then enter the quantity required
1-9 @1.25 each
Pack of 30 @1.15 each
Pack of 100 @1.00 each
