Balmoral water storage tanks have been specifically designed for the storage of water.
The tanks have been rigorously tested to comply with the requirements of the United Kingdom Water Byelaws and Regulations when correctly installed.
Suitable for many applications, Balmoral water storage tanks are not supplied with outlet/inlet fittings or pre-drilled locations. All tanks have suitable areas for fittings to be attached by the installer (such as “mousehole” recesses for outlets).
Balmoral storage tanks are rotationally moulded in one piece to provide a seamless unit that is environmentally sensitive and cost effective. They are ideally suited as irrigation storage tanks and submersible pumps are easily fitted inside.
Main Features include: High impact strength at low temps, standard 1" BSP female connector outlet, 2" fill point with cap, easily reached filling point, lightweight and easy to handle, BBA approved, ultraviolet stabilised, corrosion resistant, maintenance free, full ventilation.
Bylaw kit, including warning pipe and a breather vent, should be fitted to tanks used for water storage.
Balmoral tanks are ideal for irrigation water storage. A large number of sizes and shapes are available (all are dark green in colour) and come with a conditional guarantee. The tanks require a firm level base. A bylaw kit should be fitted to all tanks that are supplied via a ball valve from mains water.
The most common set up is a submersible pump positioned on the bottom of the tank. It is necessary to drill a hole in the top front section of the tank and a tank connector is used to join the irrigation pipe work to the pump hose inside the tank. A high pressure ball valve can also be fitted alongside for filling the tank. This type of set up is very discreet and no pump house or shelter is required.
Delivery of large goods (over 1m³) are required to have off-loading equipment at the delivery address.
(Certain postcodes in parts of Wales, Scotland, Highlands, Islands may cost more.Email for details.)