Low Voltage Cable
Irrigation Cable
Low voltage cable to connect between solenoid valves and controller. One core needed per valve used, plus a single 'common return' cable. ie. a 6 core cable will control 5 valves, the 6th core is wired to every solenoid as a 'common return'.

Heavy duty 0.8mm core cable.

Available in 4, 6 or 12 core.

Available in 100mts and 500mts lengths so for a 500mts length you will need to put a 5 in
!

2 Core x 100mts
!

4 Core x 100mts
!

6 Core x 100mts
!

8 Core x 100mts
!

10 Core x 100mts
!

12 Core x 100mts
!

16 Core x 100mts
!

20 Core x 100mts
!

Low Voltage Irrigation Cable per metre
!

This is a 8 core cable to be used from your solenoids to the controller. 

This is not suitable for burial.

DBM Quick Wire Connector
!
Larger picture

 

 

Use a DBM to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal. Recommended for use with low energy underground circuit wires, Sprinkler System, Landscape Lighting or other moisture resistance wires for applications of less than 30 volts.

Discounts on Larger quantities

Just click the box and highlight then enter the quantity required

1-9                @1.25 each

Pack of  30  @1.15 each

Pack of 100  @1.00 each

Low Voltage Heavy Duty Irrigation Cable 75mts Coil
!
Larger picture

This is a very low voltage (<30 volts) multi conductor cable,ideal for carrying power supply from controller terminals strips to electric valves .

A 0.64mm polyethylene jacket, highly resistant to mechanical stress, chemicals and moisture.

Maximum distance between controller and 24v solenoid :350mts

Available in 150mts drums e-mail for prices