Hunter Valves
!

Hunter PGV Valve
!
Larger picture

Heavy-duty Hunter solenoid
Provides dependable operation and long life

High grade construction, 150 PSI rating
Made of durable materials to resist wear

Internal and external manual bleed
Easy to use and keeps valve box dry

Flow control with non-rising handle
Adjust the flow of each zone on a system 

Rigid diaphragm support
Works to prevent stress failure in tough conditions

Globe and angle configurations
Easy to use in any application

Captive bonnet bolts and solenoid plunger
No lost parts during servicing

Accu-Set™ pressure regulator compatible
Dial setting pressure regulation for precise system control

Hunter PGV Valve Jar Top 1" Female
!
Larger picture
Jar-Top bonnet
Intuitive design makes it easy to access the valve; no tools necessary
Fully-encapuslated Hunter solenoid
Provides dependable operation and long life
High grade construction
Made of durable materials and stainless steel to resist wear
Internal and external manual bleed
Two options for manual operation
Flow control option
Adjusts the flow of each zone on a system to deliver optimum nozzle
performance
Rigid diaphragm support
Works to prevent stress failure in tough conditions
MP2000 ADVANTAGES VS. CONVENTIONAL SPRAYS

    • Higher uniformity — even after radius reduction
    • Superior wind resistance
    • Reduced misting at higher pressure
    • Outstanding close-in water
    • Lower application rate — less runoff
    • Wider operating pressure range
    • Lower system cost — ability to put more heads per zone or use smaller pipe sizes

Technical performance chart view

          Hunter ICV
          !
          Larger picture

          Glass-filled nylon construction
          220 PSI rated for maximum strength and sturdiness

          Internal manual bleed
          Keeps valve box dry

          Captive solenoid plunger
          No more lost parts when servicing

          Captive bonnet bolts with matching brass body inserts
          Provide ease of service, eliminate lost parts

          Fabric reinforced diaphragm
          Provides reliable operation up to 220 PSI

          Optional reclaimed water identification handle
          For field identification of non-potable water supply

          Optional Accu-Set™ pressure regulator
          Maintains a safe, constant water pressure level

          Hunter 1" PGV valve with 9 volt DC coil
          !
          Larger picture

          Hunter 1" Female BSP PGV Plastic Globe, jar top, c/w flow control

           Comes complete with the 1" Valve and 9 Volt coil

          9 Volt Latching Coil
          !

          For use with Hunter solenoid valves.

           

          The coil can simply be unscrewed from the valve body and replaced with the new 9 volt DC latching coil. Both coils look vaguely similar but there are distinct differences; the latching coil has a silver wrap with writing on it. Also the two wires are coloured red & black. The standard 24 volt AC coil in comparison does not have the silver wrap & distinctive writing on it and the two wires are both red. If you inadvertently install the wrong coil on any system, it simply won’t operate, but nothing will be damaged.

          DBM Quick Wire Connector
          !
          Larger picture

           

           

          Use a DBM to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal. Recommended for use with low energy underground circuit wires, Sprinkler System, Landscape Lighting or other moisture resistance wires for applications of less than 30 volts.

          Discounts on Larger quantities

          Just click the box and highlight then enter the quantity required

          1-9                @1.25 each

          Pack of  30  @1.15 each

          Pack of 100  @1.00 each